- VERY IMPORTANT: Connect router to PC via LAN cable and wait for at least 1 minute
- Launch software - right click on program icon and select "run as administrator"
- Open Models tab and select MF29. Read provided information on the program
- Set adapter's IP to which router is connected to, like requested by software. During manual IP entry leave Subnet Mask and Default Gateway fields empty
- Open "Advanced settings" tab and click "Refresh list" button
-1.PNG)
-2.png)
-3.PNG)
-4.png)
Download ZTE Routers Unlocker
- Select router's network adapter from the list and click "Connect to router"
- If router's network adapter was not detected then wait longer and click "Refresh list" again
- Wait for device to be fully detected
- NOTE: if device was not detected then you must restart it before trying to detect it again! Remember to wait at least 1 minute arfter you turn on and connect router to PC! Set device back to it's default settings - do not change IP manually
- Open User Account data tab, enter your username and password that you received after credits purchase. Click "Check account status", (you can buy credits here www.dc-unlocker.com/buy).
- If DC-Unlocker/Vygis/Rocker/Infinity dongle is connected, only click "Check account status"
- Proceed to "Unlocking" tab and click "Unlock" button
- Wait for router to be unlocked
- After message appears that unlock was finished, click "Router info", device will be detected now as unlocked
- To complete unlocking click "Disconnect router" and restart device like suggested on the program
-5.png)
-6.png)
-7.png)
-8.png)
-9.png)
-10.png)
Download ZTE Routers Unlocker
-11.png)
No comments:
Post a Comment